Make sure you have a new 3-volt, lithium battery, number CR2032, to insert. Open the battery door on the back of the meter, remove the old battery for at least 20 seconds, and press any button on the meter. Insert the new battery with the “+” sign facing out. Snap the battery door back into place. Press the on/off button, and the meter will beep. Setup and hour are flashing on the display. If the date and time are correct, press and hold the on/off button for about 4 seconds. Release the button, and you’re done.

No. Accu-Chek Performa blood glucose meters are designed exclusively for use with Accu-Chek Performa test strips.

As users currently do with most other types of blood glucose test strips on the market, they can simply check the expiration date clearly printed on their vial of the Accu-Chek Active test strips. After this date, any remaining test strips should be discarded and patients should use a new vial of test strips. This method is simpler than some other competitive strips, which still require the user to calculate and write their expiration date on their vial. Users should never test with expired test strips.

With the new Accu-Chek Performa blood glucose meters, it is not necessary to delete stored results. Once 500 blood sugar (glucose) results are in the memory, adding a new result causes the oldest one to be deleted.

With the Accu‑Chek Instant S meter, it is not necessary to delete stored results. Once 720 blood glucose results are in the memory; adding a new result causes the oldest one to be deleted. Additional editing solutions for results are available with the Accu‑Chek Connect Online system and the Accu‑Chek Smart Pix system.

No, the USB cable does not charge the meter’s batteries. Remove the USB cable after downloading results. In fact, leaving the USB cable connected to the meter and PC after download could draw power from the meter batteries. A blood glucose test cannot be performed while the Accu‑Chek Instant S meter is connected to a PC with a USB cable.

Yes, a clear protective barrier runs along the entire length of the test strip to protect the strip and chemistry. Blood applied to the opening along the end of the strip can be quickly pulled into the test strip.

The Accu‑Chek Instant S meters is our latest development in accuracy from a pioneer in blood glucose testing technologies. This is one of the most accurate meters in our portfolio.

No, the USB port for any of the Accu‑Chek Instant S is not water- or dust-resistant.

The Accu‑Chek Instant S meter is one of the most accurate systems our organization has ever manufactured and meets ISO 15197:2013/EN ISO 15197:2015 standards for accuracy. It has 10/10 analytical accuracy.

No, Accu‑Chek Instant S meters do not require manual coding.

No, there is no compatibility between the Accu‑Chek Instant S test strips with these and other Accu‑Chek systems

As with today’s products, the user will receive an E-4 error code.

No. There is no ability to squeeze extra blood from the finger to dose a strip a second time. However, there is a slight pause in testing that allows for the patient to take full use of the available blood from their finger.

The Accu‑Chek Instant S system fulfills the ISO 15197:2013/EN ISO 15197:2015 standards and delivers even tighter 10/10 accuracy for reliable results you can trust.

No, the Accu‑Chek Instant S meters are designed to ensure that the battery power level will not impact results given by the meter.

Yes, the target ranges in the meter can be changed using the device settings on the Accu‑Chek Connect app, the Accu‑Chek Connect Online system or the Accu‑Chek Smart Pix system.

Yes, the Accu‑Chek Instant S meters comply with the requirements of ISO 15197:2013/EN ISO 15197:2015 (In vitro diagnostic test systems – Requirements for blood glucose monitoring systems for self-testing in managing diabetes mellitus). 

The new Accu‑Chek Instant S test strip utilizes the FAD-GDH chemistry. This system is the most accurate in the history of our organization. It meets the 10/10 standards for accuracy

The IDF Guidelines are used for the High values range and the ADA Guidelines for the Low values range. In range: 70-160 mg/dL, below range: 69-10 mg/dL, above range: 161-600 mg/dL.

The Accu‑Chek Instant S test strip requires only a small speck of blood (0.6 μL).

No. As seen with almost all products designed for at-home use, the Accu‑Chek Instant S meters do not have a claim for diagnosis.

The FAD-GDH enzyme is a key component of the system’s new test strip chemistry, which works in conjunction with other system components to deliver advanced accuracy, highly reliable performance and reduced interferences

Flagging of test results is not possible on the meter itself. However, if a patient chooses to do so, they can add this information via Accu‑Chek Connect Online account.

The easy-edge of the Accu‑Chek Instant S test strip has the largest dosing window of any major blood glucose test strip. It can be dosed anywhere along the edge and automatically absorbs the blood from the patient’s finger. Regardless of where dosed along the edge, the system provides a fast, accurate result.

Visit your meter's Screen Messages page for a list of messages and definitions or download the User Manual (insert appropriate link) for your meter.

The Accu-Chek Aviva meter is not approved for use in clinical settings in the United States and Canada, although the Accu-Chek Aviva meter is cleared to test capillary, venous, arterial, and neonatal blood samples.

The Accu-Chek Smart Pix device reader reports potential errors during data transfer and use by causing the center display section 8 to flash. Here's what you can do: In the browser navigation, click the Read Device button. The center display section should flash slowly now, indicating that it is actively searching for devices and that it is ready for data transfer. If the error signal continues, you can unplug the Accu-Chek Smart Pix device reader and plug it back in again. Disregard any Windows error messages about removing the data medium. Try repeating the transfer again. If this error signal occurs again, check the following: Has the meter been properly prepared for data transfer? Is there anything obstructing the signal between the device IR port and the Accu-Chek Smart Pix device reader? Is the device too far away? Is there any interference from bright lights or sunlight? Often, in the case of error messages associated with data transfer, the issue is interference with data transfer, or a problem with the meter or insulin pump.

The Accu-Chek Performa meter is not approved for use in clinical settings in the United States and Canada, although the Accu-Chek Performa meter is cleared to test capillary, venous, arterial, and neonatal blood samples.

There are 2 main differences: The Accu-Chek Active test strip uses a new chemistry, eliminating clinically relevant interferences with maltose. The color of both the test area on the test strip and code chip is now green.

No, this system requires Windows® 2000, XP, XP Professional, Vista® or 7 or 8.  If you are interested in using a Mac, you should consider Accu-Chek Connect Online (insert link here).

The stored values will be kept in the meter at all times: they cannot get lost when changing the battery. If the battery change is done according to the user instructions (empty battery stays in the meter until new battery is available to be inserted) the time and date settings remain stored in the meter as well.

The device simply plugs into any available USB port. Just plug it in and it's ready to go.

Accu-Chek Active meter Accu-Chek Aviva meter Accu-Chek Performa meter Accu-Chek Nano SmartView system Accu-Chek Performa Nano meter Accu-Chek Compact meter Accu-Chek Go meter Accu-Chek Integra meter Accu-Chek Compact Plus meter Accu-Chek Mobile meter Accu-Chek Aviva/Performa Expert meter Accu-Chek Insight system Accu-Chek Insight Aviva/Performa diabetes manager Accu-Chek Aviva/Performa Connect meter Accu-Chek Voicemate Plus meter Accu-Chek Spirit insulin pump Accu-Chek Combo system Accu-Chek Spirit Combo insulin pump Accu-Chek D-TRONplus insulin pump Accu-Chek Connect Online system

Yes, any customers using the previous generation will need to keep the black activation chip in their meter. Once the black activation chip is in the meter, the customers do not need to remove it. 

With the new Accu-Chek Aviva blood glucose meters, it is not necessary to delete stored results. Once 500 blood sugar (glucose) results are in the memory, adding a new result causes the oldest one to be deleted. 

No. Accu-Chek Aviva blood glucose meters are designed exclusively for use with Accu-Chek Aviva test strips.

Accu-Chek Active meter Accu-Chek Aviva meter Accu-Chek Performa meter Accu-Chek Nano SmartView system Accu-Chek Performa Nano meter Accu-Chek Compact meter Accu-Chek Go meter Accu-Chek Integra meter Accu-Chek Compact Plus meter Accu-Chek Mobile meter Accu-Chek Aviva/Performa Expert meter Accu-Chek Insight system Accu-Chek Insight Aviva/Performa diabetes manager Accu-Chek Aviva/Performa Connect meter Accu-Chek Voicemate Plus meter Accu-Chek Spirit insulin pump Accu-Chek Combo system Accu-Chek Spirit Combo insulin pump Accu-Chek D-TRONplus insulin pump Accu-Chek Connect Online system

If stored properly, the lancets remain sterile for 4 years after sterilization.

Control test values will not be in the user-accessible memory. However, they will be stored in the downloadable memory.

Remove the black cap from the lancing device. Attach the clear plastic cap, and twist the rotatable cap until you reach your chosen depth setting. Prime the lancing device, and place the clear cap firmly against the selected site. Press the release button to lance.

Make sure you have a new 3-volt, lithium battery, number CR2032, to insert. Open the battery door on the back of the meter, remove the old battery for at least 20 seconds, and press any button on the meter. Insert the new battery with the “+” sign facing out. Snap the battery door back into place. Press the on/off button, and the meter will beep. Setup and hour are flashing on the display. If the date and time are correct, press and hold the on/off button for about 4 seconds. Release the button, and you’re done.

The meter includes an additional internal battery that retains the time and date for up to 72 hours. So when the battery is changed, no memory is lost.

The meter includes an additional internal battery that retains the time and date for up to 72 hours. So when the battery is changed, no memory is lost.

If the Accu-Chek Smart Pix device reader fails to appear on the computer as a drive: Check that the blue LED light on the front is lit. Check whether your computer and operating system satisfy the system requirements for the Accu-Chek Smart Pix device reader system. Check to make sure the USB connector is firmly plugged into the correct socket on the computer. If the Accu-Chek Smart Pix device reader is still not recognized as a drive, plug the device into a different USB socket. If the Accu-Chek Smart Pix device reader fails to emit any display signals and if the above tests don't solve the problem, try testing the device on a different computer, if available. If there is still no sign of operation, the device may be faulty.  This also applies if there are error signals flashing in the center of the display that are not associated with data transfer.  Please contact Roche Diabetes Care.

Control test values will not be in the user-accessible memory. However, they will be stored in the downloadable memory.

The Accu-Chek Active blood glucose meter has a built in USB (Universal Serial Bus) port for transferring test results to a computer that is equipped appropirately. Roche Diabetes Care offers a variety of special diabetes management hardware and software products which enhance the integrated diary functions of your meter. With these hardware and software products, you and your healthcare professional can manage your test results more effectively and use graphs and tables to understand them better.

The meter is compatible with all Accu-Chek data management tools, including the Accu-Chek 360o diabetes management system.

A USB cable to connect the reader to your computer is needed. In some cases this will be included in the DVD kit. If not, the cable can be ordered from Roche Diabetes Care separately. You can also buy a replacement or extra cable, if you need it. Some of the Accu-Chek meter systems come with USB cables, which should be used for downloading data to the software. For specific cable information, refer to your Owner's Manual.

If replaced within a reasonable time, the memory is not lost when the battery is replaced. If date and time no longer appear on the meter’s display after a battery change, a sync with the DMS is required.